3MP WiFi IP Camera PCB Board, HD Surveillance Module
- The 3MP WiFi IP Camera PCB Board is a bare surveillance module measuring 33 mm by 38 mm, built for integrators who want to embed video capture into their own housing.
- A long FPC cable separates the wide-angle lens housing from the board, so the lens can sit where the enclosure needs it while the electronics stay hidden.
- Onboard interfaces cover speaker, microphone, TF card, battery, antenna, lens, reset, Type-C charging and a power switch, simplifying assembly.
- WiFi remote connection and live mobile view let users check the feed in real time instead of reviewing footage after the fact.
- Suited to custom builds such as compact indoor monitors, battery-powered units and OEM camera products where a finished shell is not wanted.
Overview
A Camera Core You Can Build Around
This is not a finished camera in a plastic shell. It is the working core of one: a green PCB measuring 33 mm wide by 38 mm high, carrying the sensor connection, processing, wireless link and user controls on a single board. For anyone designing their own enclosure, the appeal is simple — you skip the teardown and start from a module that already speaks WiFi and already streams to a phone.
Features That Shape the Build
- Long FPC lens cable. The wide-angle lens sits in a small round housing at the end of a long black flexible flat cable, so the optics can be aimed or recessed independently of the board. That flexibility matters in doorbells, wall plates and narrow housings where the board simply will not fit behind the lens.
- Labeled connection points. Silkscreen identifies a Speaker Interface (PH1.0), Microphone, TF Card Slot, Battery Interface (PH1.25), Lens Connector, Antenna Interface, Reset Button, Type-C Charging Port and Power Switch. Each has a defined role, which shortens wiring decisions during prototyping.
- Battery-ready wiring. An assembled view shows the board connected to a silver pouch battery by red and black leads wrapped in yellow tape, alongside a speaker on a twisted pair and a slim black rod antenna. A blue indicator LED marks board status.
- Local storage on board. A memory card slots directly into the TF Card Slot, so recording does not depend on a network connection being available.
- 3MP capture with a wide-angle lens. The module is built around 3 megapixel imaging and a wide field of view, with live mobile viewing and real-time monitoring as the intended workflow.
Technical Parameters
Board dimensions are marked as 33 mm by 38 mm. The board and cable carry silkscreen codes including W3108V0.1, LZ-W319-2083M-V1.0, 260808, 5802592260808Y1220S, 268008 and WTH96C.1. Connector types are printed as PH1.0 for the speaker and PH1.25 for the battery; charging is through the Type-C port. Imaging is 3 megapixel with a wide-angle lens. Further electrical detail is not stated on the board itself — please refer to the specification sheet for supply voltage, current draw and wireless band before committing a design.
Practical Notes Before You Design It In
Because the lens, microphone and speaker are all part of the module, any product built around it can capture image and sound. That brings obligations: local privacy and data protection rules apply to how footage and audio are stored, transmitted and disclosed, and the responsibility for meeting them sits with the product builder and the end user. Recording retention depends on bitrate and card capacity rather than a fixed number of days. Night-time performance and recognition range should be validated in your own enclosure, since housing, lens placement and lighting all change the result.
Where It Fits
The module suits teams that already have a housing design and need the electronics inside it: compact indoor monitors, battery-powered units that charge over Type-C, retrofit projects where an existing shell has room for a 33 by 38 mm board, and OEM camera products sold under the buyer's own name. If you need a sealed, finished camera instead, this is the wrong starting point — but if you need the inside of one, it is already assembled.
Applications
- Custom indoor camera enclosures: the 33 by 38 mm board and long FPC lens cable let designers place optics and electronics separately inside their own housing.
- Battery-powered monitoring units: the PH1.25 battery interface and Type-C charging port support cordless builds for shelves, cabinets and temporary setups.
- OEM and private-label camera products: integrators can build a branded device around a module that already handles WiFi streaming and mobile viewing.
- Retrofit and repair projects: a compact board with labeled speaker, microphone and TF card connections replaces failed electronics inside an existing shell.
- Local-recording checkpoints: the onboard TF card slot keeps footage on the device where network coverage is unreliable.